SFF SS B
The new SFF model in the Single Flex design, revised in 2018, impresses with its compact design and high torsional stiffness. Through the disk pack angular and axial misalignment can be compensated. The specially developed clamping principle achieves a very high concentricity.
- Max. 18‘000 rpm
- High concentric clamping hubs
- Silent at high speed
- High torsional stiffness
- 8 to 600 Nm
Model | Rated torque (Nm) | Misalignment parallel (mm) | Misalignment angular (°) | Misalignment axial (mm) | Max. rpm (min-1) | Torsional stiffness (Nm/rad) | Axial stiffness (N/mm) | Inertia (kg·m2) | Mass (kg) |
SFF-040SS-8N | 8 | 0.02 | 1 | ± 0.2 | 18000 | 15000 | 174 | 0.03 × 10-3 | 0.17 |
SFF-040SS-12N | 12 | 0.02 | 1 | ± 0.2 | 18000 | 15000 | 174 | 0.03 × 10-3 | 0.17 |
SFF-050SS-25N | 25 | 0.02 | 1 | ± 0.3 | 18000 | 32000 | 145 | 0.10 × 10-3 | 0.36 |
SFF-060SS-60N | 60 | 0.02 | 1 | ± 0.3 | 18000 | 104000 | 399 | 0.22 × 10-3 | 0.52 |
SFF-060SS-80N | 80 | 0.02 | 1 | ± 0.3 | 18000 | 104000 | 399 | 0.23 × 10-3 | 0.49 |
SFF-070SS-90N | 90 | 0.02 | 1 | ± 0.5 | 18000 | 240000 | 484 | 0.40 × 10-3 | 0.72 |
SFF-070SS-100N | 100 | 0.02 | 1 | ± 0.5 | 18000 | 240000 | 484 | 0.42 × 10-3 | 0.67 |
SFF-080SS-150N | 150 | 0.02 | 1 | ± 0.5 | 17000 | 120000 | 96 | 0.79 × 10-3 | 1.04 |
SFF-080SS-200N | 200 | 0.02 | 1 | ± 0.5 | 17000 | 310000 | 546 | 1.25 × 10-3 | 1.4 |
SFF-090SS-250N | 250 | 0.02 | 1 | ± 0.6 | 15000 | 520000 | 321 | 1.54 × 10-3 | 1.62 |
SFF-090SS-300N | 300 | 0.02 | 1 | ± 0.6 | 15000 | 520000 | 321 | 1.58 × 10-3 | 1.53 |
SFF-100SS-450N | 450 | 0.02 | 1 | ± 0.65 | 13000 | 740000 | 540 | 3.27 × 10-3 | 2.53 |
SFF-120SS-600N | 600 | 0.02 | 1 | ± 0.8 | 11000 | 970000 | 360 | 6.90 × 10-3 | 3.78 |
Model | d1 Min. | d1 Max. | d2 Min. | d2 Max. | D | L | LF | S | K | M1/M2 | M1/M2 Nm |
SFF-040SS-8N | 8 | 9.25 | 8 | 16 | 38 | 38.9 | 17.5 | 3.9 | 17 | 2-M4 | 3.4 |
SFF-040SS-12N | 10 | 16 | 10 | 16 | 38 | 38.9 | 17.5 | 3.9 | 17 | 2-M4 | 3.4 |
SFF-050SS-25N | 10 | 19 | 10 | 19 | 48 | 48.4 | 21.5 | 5.4 | 20 | 2-M5 | 7 |
SFF-060SS-60N | 12 | 19 | 12 | 30 | 58 | 53.4 | 24 | 5.4 | 32 | 2-M6/2-M5 | 14 or 7 |
SFF-060SS-80N | 20 | 30 | 20 | 30 | 58 | 53.4 | 24 | 5.4 | 32 | 2-M6/2-M5 | 14 or 7 |
SFF-070SS-90N | 18 | 19 | 18 | 35 | 68 | 55.9 | 25 | 5.9 | 38 | 2-M6 | 14 |
SFF-070SS-100N | 20 | 35 | 20 | 35 | 68 | 55.9 | 25 | 5.9 | 38 | 2-M6 | 14 |
SFF-080SS-150N | 22 | 35 | 22 | 35 | 78 | 68.3 | 30 | 8.3 | 37 | 2-M8/2-M6 | 34 or 14 |
SFF-080SS-200N | 22 | 38 | 22 | 38 | 78 | 67.7 | 30 | 7.7 | 42 | 2-M8 | 34 |
SFF-090SS-250N | 25 | 28 | 25 | 42 | 88 | 68.3 | 30 | 8.3 | 50 | 2-M8 | 34 |
SFF-090SS-300N | 30 | 42 | 30 | 42 | 88 | 68.3 | 30 | 8.3 | 50 | 2-M8 | 34 |
SFF-100SS-450N | 32 | 48 | 32 | 48 | 98 | 90.2 | 40 | 10.2 | 56 | 2-M10 | 68 |
SFF-120SS-600N | 32 | 55 | 32 | 55 | 118 | 90.2 | 40 | 10.2 | 68 | 2-M10 | 68 |
Mechanical engineering
In the field of special machine construction there is a large variety of applications and usage of drive technology equipment. As this field is extremely wide in applications Miki Pulley is supplying to special coil winding machine producers, ship loaders…
Servomotor
Used in the field of robotics, handling automation or for the drive of linear actuators, the requirements to the new series of Servomotors is rising daily. For the safety application in a servomotor, especially in the case of a power shortage or emergency stop, Miki Pulley…
Machine tool
Miki Pulley is proudly looking back to a long year’s successful history in the field of machinetools. With a market share of over 80% in Japan in the field of flexible shaft couplings Miki Pulley could achieve the market leader position in this specific field. The flexible…